Locomotive decoder LE080XS
9
DIGITAL plus
CV
Description
Range
Setting
50
Decoder Configuration, byte 2:
Similar to CV 29, but used to set other properties
0
bit 0
not used
bit 1
[2]
0 = CV23 and CV24 are not active
1 = CV23/CV24 are active and contain the
acceleration and deceleration trim values
that are added to CV3 or CV4.
0,1
0
(2)
bit 2
[3]
Brake momentum on DC operation.
Used to achieve prototypical braking at red
signal indications if conventional DC control
CV29.2 is disabled. (CV 29 bit 2 = 0)
0 = locomotive proceeds with track voltage
dependent speed inside the conventional DC
section.
1 = locomotive brakes in the conventional
DC section with pre set brake momentum.
0,1
0
(4)
bits
3-7
not used
51
Lighting Special Effects for Outputs A and B
0
bit 0
(1)
0 = the headlights are directional.
1 = the lights are independent per Rule 17.
F0 controls the front headlight and F1 the
rear headlight or a separate function.
0,1
0
(1)
bit 1
(2)
0 = function dimming disabled
1 = the value in CV52 is used for
headlight/function dimming. If CV51.0 = 0
then F1 dims the headlight if on.
0,1
0
(2)
bit 2
(3)
1= if CV51.0 and CV51.2 both =1 (dimming
and Rule17 are both active), F4 dims F0
0,1
0
(4)
bit 3
(4)
1= if CV51.0 and CV51.2 both =1 (dimming
and Rule 17 are both active), F4 dims F1
0,1
0
(8)
bits
4-7
Not used
52
Dimming CV - contains the value used for dimming.
0 is dark 255 is max brightness
0-255
64
53
Lighting Special Effects for Outputs C and D
0
bit 0
(1)
1 = Output C blinks with the frequency set in
CV56
0,1
0
(1)
bit 1
(2)
1 = Output D blinks with the frequency set in
CV56
0,1
0
(2)
bit 2
(3)
1= Outputs C and D act as Ditch Lights. F2
controls alternate blinking when Output C is
on. CV 54 and CV55 should be set to have
identical values.
0,1
0
(4)
