Lenoxx H500, Руководство пользователя

Страница: 5 / 8

-
Never place anything on your heater as this may cause overheating (e.g. towels).
Never use your appliance to dry washing.
IP24 WATER RESISTANCE:
Protected from water spray from any direction
Before use:
-
Remove the heater from the box
- Remove all packaging material
-
Check the installation parts
Parts description:
1. Back panel
2. Control panel
3. Temperature control
4. Power switch
5. Front panel
6. Castors
Installation:
1.
The panel convector heaters should be wall mounted. Some items can be also
set on castors.
2. Mount castors on the baseboard in accordance with scheme G1. For wall
mounting study scheme G2.
3. Drill holes in the wall. The diameter of holes should be about 8mm.
4. Fix the bracket with screws.
5. There should be at least 200mm between the bottom edge of the item and the
floor. The distance to any other objects should be at least 200mm from the side
and 500mm in front.
6. Pay attention to the position of the heater with regard to other objects.
7. The heater must not be located immediately below a socket outlet.