background image

FAST FORWARD

Press Fast Forward button (15) to advance the tape. Release the

button by pressing Stop.

POWER

To turn radio on, slide Radio/Tape switch (1) to RADIO. To shut the

radio off, slide switch TAPE. To turn tape on, slide switch to TAPE

(radio off) position and press Play. When the tape reaches the end

and Play button pops up, the power is off.

LOCK SWITCH

Sliding the Tune Lock switch ON (up) disables the Front panel

(door) buttons. This prevents accidentally tuning to a different

station.

BASS BOOST SWITCH

Sliding this switch to ON gives you more bass ( low frequency )

sounds in radio or tape.

FM STEREO SWITCH

Sliding the switch to FM STEREO ON (stereo) will give you stereo

sound and stereo indicator will show in the display window.

However, some FM Stereo stations are noisy, so you may want to

switch to OFF (mono) for clearer sound in some locations.

NOTE:

 To avoid damaging the tape head, do not open the cassette

door in the play mode. Press Stop first.

ANTENNA

The AM Band has a built-in ferrite rod antenna. The FM Antenna is

built-in to headphone wire so be sure to extend the headphone wire

for best reception. You may find you can improve AM reception by

rotating the set or bringing it closer to a window.

1135110298

E

5

Содержание 1135











Отзывы: