69
Lenovo V560/B560
1180 Antenna assembly and LCD cover
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 37
•
“1020 Dummy card” on page 38
•
“1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover” on page 39
•
“1040 Hard disk drive” on page 40
•
“1050 Optical drive” on page 41
•
“1060 DIMM” on page 42
•
“1070 PCI Express Mini Card for wireless LAN/WAN” on page 43
•
“1080 Keyboard” on page 45
•
“1090 Keyboard bezel” on page 47
•
“1100 System board” on page 51
•
“1110 LCD unit” on page 54
•
“1150 LCD front bezel” on page 64
•
“1160 LCD panel, LCD cable and hinges” on page 65
Figure 18. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the
direction shown by arrows
1
.
When installing:
Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.