54
Lenovo V560/B560 Hardware Maintenance Manual
1110 LCD unit
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 37
•
“1020 Dummy card” on page 38
•
“1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover” on page 39
•
“1040 Hard disk drive” on page 40
•
“1050 Optical drive” on page 41
•
“1060 DIMM” on page 42
•
“1070 PCI Express Mini Card for wireless LAN/WAN” on page 43
•
“1080 Keyboard” on page 45
•
“1090 Keyboard bezel” on page 47
•
“1100 System board” on page 51
Figure 11. Removal steps of LCD unit
Release the antenna cables from the cable guides in the direction shown by
arrows
1
. Remove two screws
2
.
1
1
1
2
2
Step
Screw (quantity)
Color
Torque
2
M2.5 × 8 mm, flat-head, nylok-coated (2)
Black
3.0 kgfcm
When installing:
Route the antenna cables along the cable guides. As you route the cables,
•
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached firmly and make sure that you
•
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.