Lenovo V480s Скачать руководство пользователя

Страница: 35 / 82

Also, when the time set on the resume timer elapses, the computer automatically returns from sleep mode
and resumes operation.

Note:

The computer does not accept any input immediately after it enters sleep mode. Wait a few seconds

before taking any action to reenter operation mode.

Hibernation mode

In hibernation mode, the following occurs:

• The system status, RAM, VRAM, and setup data are stored on the hard disk drive.

• The system is powered off.

If you have defined one of the following actions as the event that causes the system to go into hibernation
mode, perform that action.

• Closing the lid.

• Pressing the power button.

Also, the computer goes into hibernation mode automatically in either of the following conditions:

• If a “hibernation time” has been set on the timer, and if the user does not do any operation with the

keyboard, the hard disk drive, the parallel connector, or the diskette drive within that time.

• If the timer conditions are satisfied in suspend mode.

When the power is turned on, the computer returns from hibernation mode and resumes operation. The
hibernation file in the boot record on the hard disk drive is read, and system status is restored from the
hard disk drive.

Chapter 4

Related service information

Содержание V480s



















































































Результаты поиска

Содержание V480s

Отзывы:

Похожие инструкции для V480s

Бренды по названию

Популярные бренды

Lenovo V480s, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание V480s

Отзывы:

Похожие инструкции для V480s

Бренды по названию

Популярные бренды