Replacing field-replaceable units (FRUs)
39
Replacing the card reader
Attention
Do not open your computer or attempt any repairs before reading the
Important
Product Information Guide
.
1
Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
2
Remove the computer cover. For details, see
Removing the computer cover.
3
Remove the front bezel. For details, see
Replacing the front bezel.
4
Pivot the drive bay assembly upward. For details, see
Pivoting the drive bay assembly upward and
downward.
5
Disconnect the card reader cable from the system board.
6
Replace the card reader.
Caution
Touch only the edges of the card reader. Do not touch the card reader’s circuit
board.
1
2
7
Connect the card reader cable to the system board.
8
Reinstall the removed parts and computer cover, and then reconnect the cables. For details,
see
Completing the parts replacement.