Lenovo ThinkSystem NE2580O RackSwitch Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 92

background image

16

NE2580O Installation Guide

NE2580O Documentation

This

Installation Guide

provides information and instructions for installing the

NE2580O, updating the firmware, and solving problems. For other information
about configuration and management of the switch, refer to the documents
described in

“Related Documentation” on page 16

Notes:



The illustrations in this document might differ slightly from your hardware.



The console output described or referenced in this document might differ
slightly from that displayed by your system. Output varies according to the type
of Lenovo chassis and the firmware versions and options that are installed.

Notices and Statements in this Document

The following notices and statements are used in this document:



Note:

These notices provide important tips, guidance, or advice.



Important:

These notices provide information or advice that might help you

avoid inconvenient or problem situations.



Attention:

These notices indicate potential damage to programs, devices, or

data. An attention notice is placed just before the instruction or situation in
which damage could occur.



Caution:

These statements indicate situations that can be potentially hazardous

to you. A caution statement is placed just before the description of a potentially
hazardous procedure step or situation.



Danger:

These statements indicate situations that can be potentially lethal or

extremely hazardous to you. A danger statement is placed just before the
description of a potentially lethal or extremely hazardous procedure step or
situation.

Related Documentation

Additional or updated product documents may be available from the Lenovo
website. Such documents may cover features not described in the original
documentation that comes with the switch, or may include technical updates or
corrections.

You can obtain up-to-date information on the Lenovo support website:

http://support.lenovo.com/

For a list of compatible switch components and options (such as rack-mounting kits,
modules, cords, and cables), see the

Lenovo Networking Catalog

.

«
...
14
15
16
17
18
...
»

Содержание ThinkSystem NE2580O RackSwitch





























































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkSystem NE2580O RackSwitch

Бренд: D-Link Страницы: 267

Бренд: H3C Страницы: 1089

Бренд: Painless Performance Products Страницы: 2

Бренд: Cables to Go Страницы: 4

Бренд: Ultra Страницы: 20

NAMUR BES G06MD-GNX10B-EV02-EEX

Бренд: Balluff Страницы: 56

Бренд: Thinklogical Страницы: 27

Бренд: Topex Страницы: 170

Бренд: Comtech EF Data Страницы: 70

Бренд: JetNet Страницы: 20

Бренд: Dahua Страницы: 12

Бренд: W Box Technologies Страницы: 10

Бренд: Black Box Страницы: 76

Бренд: Leaksafe Solutions Страницы: 12

Бренд: Anker Страницы: 16

Бренд: Link Страницы: 35

MMAC-Plus 9H421-12

Бренд: Cabletron Systems Страницы: 12

PREMASREG 716x Series

Бренд: S+S Regeltechnik Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды