Lenovo ThinkSystem NE2552E, Инструкция по применению

Страница: 59 / 574

© Copyright Lenovo 2018 Chapter 2: Initial Setup
59
Default Setup Options
The Setup prompt appears automatically whenever you login as the system
administrator under the factory default settings.
1.
Connect to the switch.
After connecting, the login prompt will appear as shown here.
2.
Enter
USERID
as the default administrator and
PASSW0RD
(with a zero) as the
default password.
3.
Enter the following command at the prompt:
Stopping Setup
To abort the Setup utility, press
<Ctrl+C>
during any Setup question. When you
abort Setup, the system will prompt:
Enter
n
to abort Setup, or
y
to restart the Setup program at the beginning.
Restarting Setup
You can restart the Setup utility manually at any time by entering the following
command at the administrator prompt:
Enter login username:
Enter login password:
NE2552E(config)# setup
Would you like to run from top again? [y/n]
NE2552E(config)# setup