Lenovo ThinkStation P520 Скачать руководство пользователя страница 134

Страница: 134 / 174

a. Pull the front fan assembly by the handle to slide it out of the computer chassis.

Note:

When you slide out the front fan assembly, avoid pulling the front-fan-assembly cable.

Figure 116. Removing the front fan assembly

b. Disconnect the front-fan-assembly cable from the front-fan-assembly connector on the system

board.

4. To install a new front fan assembly, do the following:

a. Connect the cable of the new front fan assembly to the front-fan-assembly connector on the system

board. See “Parts on the system board” on page 8.

b. Align the top and bottom edges of the new front fan assembly with the front-fan-assembly retainer in

the computer chassis. Then, slide the new front fan assembly inward until it is secured in position.

Figure 117. Installing the front fan assembly

5. Reinstall the M.2 solid-state drive holder, the full-length PCIe cards, the PCIe card retainer, and the

super capacitor module if you have removed them.

122

P520 User Guide

Содержание ThinkStation P520















































































































































































Результаты поиска

Содержание ThinkStation P520

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkStation P520, Руководство пользователя

Результаты поиска

Содержание ThinkStation P520

Отзывы:

Бренды по названию

Популярные бренды