Lenovo ThinkStation 4223 Скачать руководство пользователя

Страница: 97 / 136

Chapter 11. Troubleshooting and diagnostics

This chapter describes some basic troubleshooting and diagnostic programs. If your computer problem
is not described here, see Chapter 12 “Getting information, help, and service” on page 103 for additional
troubleshooting resources.

Basic troubleshooting

The following table provides information to help you troubleshoot your computer problems.

Note:

If you cannot correct the problem, have the computer serviced. For a list of service and support

telephone numbers, refer to the

ThinkStation Safety and Warranty Guide

that comes with your computer or

go to the Lenovo Support Web site at http://www.lenovo.com/support/phone.

Symptom

Action

The computer does not start
when you press the power
switch.

Verify that:

• The power cord is correctly connected to the rear of the computer and to a

working electrical outlet.

• If your computer has a secondary power switch on the rear of the computer,

make sure that it is switched on.

• The power indicator on the front of the computer is on.

• The computer voltage matches the voltage available at the electrical outlet for

your country or region.

The monitor screen is blank.

Verify that:

• The monitor signal cable is correctly connected to the monitor and to the

appropriate monitor connector on the computer.

• The monitor power cord is correctly connected to the monitor and to a working

electrical outlet.

• The monitor is turned on and the brightness and contrast controls are set

correctly.

• The computer voltage matches the voltage available at the electrical outlet for

your country or region.

• If your computer has two monitor connectors, be sure to use the connector

on the graphics card.

The keyboard does not work.

Verify that:

• The computer is turned on.

• The keyboard is securely connected to a USB connector on the computer.

• No keys are stuck.

The mouse does not work.

Verify that:

• The computer is turned on.

• The mouse is securely connected to a USB connector on the computer.

• The mouse is clean. Refer to “Optical mouse” on page 83 for further information.

Содержание ThinkStation 4223









































































































































Результаты поиска

Содержание ThinkStation 4223

Отзывы:

Похожие инструкции для ThinkStation 4223

Бренды по названию

Популярные бренды

Lenovo ThinkStation 4223, Руководство пользователя

Результаты поиска

Содержание ThinkStation 4223

Отзывы:

Похожие инструкции для ThinkStation 4223

Бренды по названию

Популярные бренды