Lenovo ThinkStation 4223 Скачать руководство пользователя | Manualshive

Страница: 30 / 136

background image

• To remove dust or fingerprints, wipe the disc with a clean, soft cloth from the center to the outside. Wiping

the disc in a circular direction might cause loss of data.

• Do not write or stick paper on the disc.

• Do not scratch or mark the disc.

• Do not place or store the disc in direct sunlight.

• Do not use benzene, thinners, or other cleaners to clean the disc.

• Do not drop or bend the disc.

• Do not insert damaged discs into the drive. Warped, scratched, or dirty discs can damage the drive.

Playing a CD or DVD

If your computer comes with a DVD drive, you can listen to audio CDs or watch DVD movies. To play a
CD or DVD, do the following:

1. Press the Eject/Load button on the DVD drive to open the tray.

2. With the tray fully extended, insert the CD or DVD into the tray. Some DVD drives have a snap hub in the

center of the tray. If your drive has a snap hub, support the tray with one hand and then push on the
center of the CD or DVD until it snaps into place.

3. Press the Eject/Load button again or gently push the tray forward to close the tray. The CD or DVD

player program starts automatically. For additional information, refer to the CD or DVD player program
help system.

To remove a CD or DVD from the DVD drive, do the following:

1. With the computer on, press the Eject/Load button. When the tray slides out automatically, carefully

remove the disc.

2. Close the tray by pressing the Eject/Load button or by gently pushing the tray forward.

Note:

If the tray does not slide out of the drive when you press the Eject/Load button, insert a straightened

paper clip into the emergency-eject hole located on the front of the DVD drive. Be sure the drive is powered
off when using the emergency eject. Use the Eject/Load button instead of the emergency eject except
in an emergency.

Recording a CD or DVD

If your computer comes with a recordable DVD drive, you can use the drive to record CDs or DVDs. To
record a CD or DVD, do the following:

1. Click

Start

➙

All Programs

➙

Corel DVD MovieFactory Lenovo Edition

.

2. Follow the instructions on the screen.

For detailed information about using the Corel DVD MovieFactory program, see the help system for the
program.

You can also use Windows Media Player to record CDs and data DVDs. For more information, see “Help and
Support” on page 103.

18

ThinkStation User Guide

«
...
28
29
30
31
32
...
»

Содержание ThinkStation 4223









































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkStation 4223

Бренд: T-MAG Страницы: 22

Бренд: Panasonic Страницы: 15

Бренд: Layher Страницы: 6

TIGW1U - Carrier Grade Server

Бренд: Intel Страницы: 11

Бренд: IBM Страницы: 190

Бренд: Steinberg Страницы: 820

Бренд: Winmate Страницы: 20

Бренд: Ruijie Networks Страницы: 30

Бренд: Asus Страницы: 80

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 56

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 69

Бренд: Asus Страницы: 28

Бренд: Asus Страницы: 28

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 2

Chromebox CN Series

Бренд: Asus Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды