Lenovo ThinkStation 4215, Руководство по техническому обслуживанию аппаратной части, Страница: 63 / 180

Diagnostic Error Code FRU/Action
000-196-XXX
BIOS test halt, error threshold exceeded
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
000-197-XXX
BIOS test warning
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 49.
2.
Re-run test.
3. Replace the component that is called out
in warning statement
4. Replace the component under test.
000-198-XXX
BIOS test aborted
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 49.
2.
Flash the system and retest. See
“Updating (flashing) the BIOS” on page
167.
3.
Go to “Undetermined problems” on
page 81.
000-199-XXX
BIOS test failed, cause unknown
1. Go to “Undetermined problems” on
page 81.
2. Flash the system and re-test.
3. Replace component under function test.
000-250-XXX
BIOS APM failure
1. Flash the system. See “Updating
(flashing) the BIOS” on page 167.
2.
System board
000-270-XXX
BIOS ACPI failure
1. Flash the system. See “Updating
(flashing) the BIOS” on page 167.
2.
System board
001-000-XXX
System Test Passed
No action
001-00X-XXX
System Error
System board
001-01X-XXX
System Error
System board
001-024-XXX
System Addressing test failure
System board
001-025-XXX
System Checksum Value error
1.
Flash the system. See “Updating
(flashing) the BIOS” on page 167.
2. System board
001-026-XXX
System FLASH data error
1. Flash the system. See “Updating
(flashing) the BIOS” on page 167.
2. System board
001-027-XXX
System Configuration/Setup error
1. Run the Setup Utility program.
2. Flash the system. See “Updating
(flashing) the BIOS” on page 167.
3.
System board
Chapter 8. Symptom-to-FRU Index
57