Lenovo THINKPAD R51E, Дополнительное руководство

Страница: 49 / 104

2.
Click
Power Management
.
3. Click the Intel SpeedStep technology tab.
4. From the list, select the mode you want.
5. Click OK .
Problem:
You cannot connect using the built-in wireless networking card.
Solution:
If the computer display is closed, open it and try again.
Problem:
If your operating system is Windows 2000 and you are using a USB 1.x
device, then when your computer returns from standby or hibernation
mode to normal operation, the
″
Unsafe Removal of Device
″
message may
appear.
Solution:
You can safely close this message. It is displayed because of the USB 2.0
driver problem on Windows 2000. You can get detailed information in the
More Information section of the Microsoft Knowledge Base 328580 and
323754. Visit the Microsoft Knowledge Base homepage at
http://support.microsoft.com/, type the number of the knowledge base
article you need in the search field, and click the Search button.
Problem:
An application does not run correctly.
Solution:
Make sure that the problem is not being caused by the application.
Check that your computer has the minimum required memory to run the
application.
Refer to the manuals supplied with the application. Check the following:
v
The application is designed to operate with your operating system.
v
Other applications run correctly on your computer.
v
The necessary device drivers are installed.
v
The application works when it is run on some other computer.
If an error message appears while you are using the application program,
refer to the manuals supplied with the application.
On some models, the following application programs may not run
correctly. Download the latest version from the Web site listed below:
v
ThinkPad 2.5 inch Hard Disk Drive Firmware Update Utility (version
released before January 24, 2005): The latest version is available at
http://www.lenovo.com/think/support/
Solving computer problems
Chapter 2. Solving computer problems
27