Lenovo ThinkEdge SE70, Руководство пользователя, Страница: 9 / 46

LED status Indication
Fast blinking orange
The appliance is restoring to the factory image and deleting all user data.
Fast blinking red
The appliance is under Fault Condition that supports automatically identifying
and warning issues like Overheat or boot crash during Power On Self-Test.
Network LED status
The network LEDs have the following status:
LED status Indication
Solid red
Neither an Ethernet cable is not connected, nor Wi-Fi
®
is not enabled.
Solid green
An Ethernet cable is connected.
Blinking green
The appliance is communicating over the network.
Solid blue
An Ethernet cable is not connected, but Wi-Fi is enabled.
Power button with indicator
Press to turn on the computer. The indicator in the power button shows the system status of your computer.
LED status Indication
Solid white The computer is operating normally.
Off The computer is off or in hibernation mode.
To turn off the computer, you can do either of following:
• Open the system menu from the top-right corner and click Shut Down .
• Short press power button until the indicator turns off.
CANbus connector
Used to connect to a CANbus enabled device or dongle. For more information about commands, see “Use
the I/O tool guide (for ThinkEdge SE70)” on page 18.
Note: Connections made to this connector must use the cable (26 AWG-18 AWG / 105°C).
CANbus Pin definition mapping table
Pin number Pin definition
1 D-
2 D+
3 GND
Chapter 1
.
Meet your computer
3