Diagnostic Error Code
FRU/Action
014-197-XXX
Parallel port test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 57.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
014-198-XXX
Parallel port test aborted
1. If a component is called out, make sure it is
connected and/or enabled.
2. Flash the system and re-test. See “Flash update
procedures” on page 167.
3. Go to “Undetermined problems” on page 82.
014-199-XXX
Parallel port test failed, cause unknown
1. Go to “Undetermined problems” on page 82.
2. Flash the system and re-test. See “Flash update
procedures” on page 167.
3. Replace component under function test.
014-2XX-XXX 014-3XX-XXX
Parallel port failure
1. External parallel device
2. System board
015-000-XXX
USB port Interface Test Passed
No action
015-001-XXX
USB port Presence
1. Remove USB device(s) and re-test.
2. System board
015-002-XXX
USB port Timeout
1. Remove USB device(s) and re-test.
2. System board
015-015-XXX
USB port External Loopback failure
1. Remove USB device(s) and re-test.
2. System board
015-027-XXX
USB port Configuration/Setup error
1. Flash the system. See “Flash update procedures”
on page 167.
2. System board
015-032-XXX
USB port Device Controller failure
System board
015-034-XXX
USB port buffer allocation failure
1. Reboot the system
2. Flash the system and re-test. See “Flash update
procedures” on page 167.
3. Run memory test.
4. System board
015-035-XXX
USB port Reset condition detected
1. Remove USB device(s) and re-test.
2. System board
015-036-XXX
USB port Register error
System board
015-040-XXX
USB port IRQ failure
1. Run the Setup Utility program and check for
conflicts.
2. Flash the system. See “Flash update procedures”
on page 167.
3. System board
015-195-XXX
USB port Test aborted by user
Information only Restart the test, if necessary.
Chapter 7
.
Symptom-to-FRU Index
69
Содержание ThinkCentre Edge 71z
