Lenovo ThinkCentre 41N5583, Руководство пользователя

Страница: 24 / 72

Securing a disc in a vertically mounted drive
To load a disc into a vertically mounted drive, do the following:
Note: The drive tray design might be different than shown (varies by manufacturer).
1. Press the Eject/Load button.
2. Insert the disc into the tray and make sure it is placed securely behind the vertical mounting tabs
1
.
3.
Close the loading tray by pressing the
Eject/Load
button, or by gently pushing the tray in.
Note: 8 cm and
″
credit card CDs
″
cannot be used in vertically mounted drives without a special adapter.
Manually ejecting a disc
If you press the Eject/Load button and the tray does not slide out, turn off the computer. Straighten a
large paper clip to form a tool, as shown in the illustration. The straightened end must extend at least 45
mm (1.8 in.). Insert the extended end into the manual-eject hole on the front of the drive (see “Drive
controls and connectors” on page 1-3). Push the paper clip into the hole until the tray opens. Gently pull
out the tray until you can remove the disc.
45 mm
1.8 in
Using media
Your Multi-Burner Plus can record onto the following types of media:
v DVD-RAM : Write many times media that is optimized for data storage. DVD-RAM media can be read
in most modern DVD-ROM drives, but cannot be read by some set-top DVD players.
v
DVD-R : Write once media that has the best compatibility with set-top DVD players and computers.
DVD-R media can be read in almost any type of DVD-ROM drive or DVD player.
v DVD-R DL
: Write once media that has a higher capacity (8.5 GB) than ordinary DVD-R media. DVD-R
DL media can be read in many DVD-ROM drives and DVD players but is not as compatible as the
lower capacity DVD-R media.
v
DVD-RW : Write many times media that can be read in most set-top DVD players and almost all
computers. Some older DVD players might not be able to read this media.
3-2
Multi-Burner Plus User’s Guide