27
Chapter 5. Upgrading and replacing devices
Replacing the battery
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the battery, do the following:
1
Turn off the computer. Disconnect the AC adapter and all cables from the
computer.
2
Close the computer display, and turn the computer over.
3
Unlock the manual battery latch . Hold the spring-loaded battery latch
in the unlocked position , remove the battery pack in the direction
shown by the arrow .
4
Install a fully charged battery.
5
Slide the manual battery latch to the locked position.
6
Turn the computer over again. Connect the AC adapter and the cables to
the computer again.
The following table provides a list of CRUs (Customer Replaceable Units) for your
computer, and informs you of where to find replacement instructions.
Note:
Use only the battery provided by Lenovo. Any other battery could ignite or
explode.
Setup Poster
User Guide
AC adapter
O
Power cord for AC adapter
O
Battery
O
O
c
b
a
S10-3 UserGuide V1.0_en.book Page 27 Friday, December 25, 2009 3:58 PM