Lenovo ServeRAID M5120, Руководство пользователя

Страница: 38 / 74

Detailed Installation 2-5
Step 4. Replace the Bracket (If Necessary)
If you have to remove the preinstalled expansion-slot bracket
and replace it with the low-profile bracket, complete the
following steps; otherwise, go to
step 5 on page 8.
a. Orient the controller so that the gold-edge connector is on
the bottom and the SAS ports are on the left, as shown in
the following figure.
Figure 2.3 Attaching a Low-Profile Expansion-Slot Bracket to the
Controller
b. Remove the two screws that hold the bracket on to the
controller.
c. Lift the bracket from the controller and store the bracket in
a safe place for possible reuse.
d. Align the low-profile bracket so that the tabs are on the
backside of the controller and the holes on the tabs align
with the holes on the controller.
3_01457a-00
Metal
Expansion-Slot
Bracket
Controller
Screws
Gold-Edge
Connector