Lenovo RackSwitch G8264, Руководство по установке

Страница: 75 / 106

© Copyright Lenovo 2017
75
Chapter 5. Initializing the G8264
When you supply power to the G8264, the switch initializes automatically for basic
functions.
Statement 5
CAUTION:
The
power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current from
the device, ensure that all power cords are disconnected from the power source.
System Status LEDs
The following LEDs on the switch front panel indicate the overall system status:

Power: Steady green if the both power cords are connected, or flashing green if
the only one power cord is connected.

Service ( ! ): Off if the system is OK, or flashing if service is required.
For additional LED indicators, see the appropriate section in Chapter 2, “Switch
Components ” starting on page 19 .
Connecting to the Switch
Use the switch Command ‐ Line Interface (CLI) to perform additional configuration
tasks. You can access the CLI using the serial console port or management port.
Using the Serial Console Port
You can access the switch CLI through the serial console port on the front panel of
the switch. This port uses RS ‐ 232 serial communications. Use the console cable kit to
connect the serial console port to a terminal or a computer running a terminal
emulation program.
1
2