Lenovo L193 Wide, Руководство пользователя

Страница: 20 / 29

3-4
Flat Panel Monitor User ’s Guide
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows Vista,
Microsoft. Windows XP. and Microsoft Windows 2000 Professional.
Installing the monitor driver in Windows Vista
To install the device driver in Microsoft® Windows Vista, do the following:
Note
: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows Vista.
1.
Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows Vista operating
system.
4. Open the Display Properties window by clicking Start, Control Panel and then double-clicking the
Hardware and Sound icon.
5. Click the Personalization icon.
6. Click the Display Settings icon.
7. Click the
Advanced Settings
button.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Open the " Update Driver Software-Generic PnP Monitor " window by clicking on Update Driver and
then click the "
Browse my computer for driver sfotware"
button.
12. Select “ Let me pick from a list of device drivers on my computer ” .
13. Click the Have Disk button. Click on the Browse button and navigate to the following directory:
X:\ Monitor Drivers \ Windows Vista
(where X is the drive letter designator for the CD-ROM drive).
14. Select the "
L193 wide .inf
" file and click the
Open
button. Click the
OK
button.
15. Select L193 wide and click Next. The files will be copied from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo
recommends using either 1440 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Installing the monitor driver in Windows XP
To use the Plug and Play feature in Windows XP, files should be loaded from the
Reference and Driver CD
.
Note: This section must be completed before continuing with the Windows XP automatic image setup.
1.
Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot into Windows XP.
4. Open the Display Properties window by clicking Start
→
Settings
→
Control Panel, and then
double-clicking the Display icon.
5. Click the
Settings
tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the
Drivers
tab.
10. Open the
Hardware Update Wizard
window by clicking on
Update Driver
, and then click
Next.