To delete a previously set Power-On Password, do the following :
1. From the Security menu, select
Set Power-On Password
and press
Enter
.
2. The password dialog box will be displayed. Enter Current Password and press Enter. Press Enter in New
Password and confirm New Password dialog. A setup notice will display that changes have been saved.
3. Select
Exit
.
4. Select
Save changes and Exit
.
Enabling or disabling a device
The
Devices
options is used to enable or disable user access to the following devices:
USB Functions
Select whether to enable or disable
USB
(Universal Serial
Bus) functions. If the functions are disabled, no
USB
devices can be used.
SATA Controller
When feature is set to
Disabled
, all devices connected to
the SATA connectors (e.g. hard disk drives or the optical
disk drive) are disabled and can’t be accessed.
Onboard Audio Controller
Select whether to enable or disable the
Onboard Audio
Controller
, when feature is set to Disabled all devices
connected to the audio connectors (e.g. a headphone or
a microphone) are disabled and can’t be used.
Onboard Ethernet Controller or Onboard PXE
Controller
Select whether to enable or disable
Onboard Ethernet
Controller
, or select whether to enable or disable load
onboard
PXE
(
Preboot Execution Environment
).
To enable or disable a device, do the following:
1. Start the Setup Utility program (see “Starting the Setup Utility program” on page 13).
2. From the Setup Utility program menu, select
Devices
.
3. Select:
USB Setup
press the
Enter
key, and then select
USB Functions
.
ATA Drives Setup
press the
Enter
key , and then select
SATA Mode
.
Audio Setup
press the
Enter
key, and then select
Onboard Audio Controller
.
Network Setup
press the
Enter
key, then select
Onboard Ethernet Support
or
LAN Boot Agent
.
4. Select
Disabled
or
Enabled
and press the
Enter
key.
5. Return to the Setup Utility program menu and select the
Exit
option.
6. Select
Save changes and Exit
from the menu.
Note:
If you do not want to save the settings, select
Discard changes and Exit
from the menu.
Selecting a startup device
If your computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as
expected, use one of the following procedures to select a startup device.
Selecting a temporary startup device
Use this procedure to startup from any boot device.
Note:
Not all CDs, hard disks, and diskettes are bootable.
Chapter 5
.
Using the Setup Utility
15
Содержание IdeaCentre Q190 Series
