Lenovo IdeaCentre C240, Руководство по техническому обслуживанию аппаратной части

Страница: 45 / 63

Step 5. Disconnect the power switch board cable from the connector on the motherboard. 1
Step 6. Remove the screw that secures the power switch board to the rear cover and lift up the power
switch board to remove it.
2
1
2
Step 7. To install the power switch board:
a. Line up the holes on the new power switch board with the mounting holes on the rear cover
and secure the new power switch board with the screws.
b. Connect the data cable to the connector on the new motherboard.
Step 8. Reattach the rear cover and secure it with the screws.
Replacing the motherboard
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.
To replace the motherboard:
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the rear cover. Refer to “Removing the rear cover”.
Step 5. Remove all memory modules. Refer to “Replacing a memory module”.
Step 6. Remove the heat-sink. Refer to “Replacing the heat-sink”.
Step 7. Remove the Wi-Fi card. Refer to “Replacing the Wi-Fi card”.
Chapter 8
.
Replacing hardware
39