Chapter 2� Adjusting and Using your monitor 2-3
Adjusting your monitor image
This section describes the control features to adjust your monitor images�
Using direct access controls
Direct access controls can be used when the On-Screen Display (OSD) is not displayed�
Icon
Name
Description
1
Select “1” is Type C port USB-C function�
One Key Switch
Select “2” is HDMI/DP port USB-B function�
Press and hold for 10 seconds to enable or disable the
DDC-CI
DDC-CI function�
Exit
Exit and return to the previous level�
2
Switch the video input source�
Input Source
Shift back to the previous level when in OSD mode�
Press to move the main menu cursor up from the active
Increase/Up
item to the last one�
Press to increase current values on the adjustment bar�
Brightness
Direct access to Brightness adjustment�
3
Press to move the main menu cursor down from the active
Decrease/Down
item to the next one�
Press to decrease current values on the adjustment bar�
Access the OSD menu�
Menu
Press to confirm selection�
4
Press and hold for 10 seconds will lock/un-lock the menu�
Press to enter the next level on the main menu/sub menu
Enter
status or enter the previous level on the adjustment bar�
*Note:
One Key Switch: Press and select “1” to be Type C port USB-C function�
Press and select “2” to be HDMI/DP port USB-B function�
