Lenovo 7X15 Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 104

background image

Tool

Update
Methods
Supported

Core
System
Firmware
Updates

I/O Devices
Firmware
Updates

Graphical
user
interface

Command
line
interface

Supports
UXSPs

Lenovo XClarity
Integrator (LXCI) for
Microsoft System
Center Configuration
Manager

In-band

On-Target

√

All I/O

devices

√

√

Notes:

1. For I/O firmware updates.
2. For BMC and UEFI firmware updates.

•

Lenovo XClarity Provisioning Manager

From Lenovo XClarity Provisioning Manager, you can update the Lenovo XClarity Controller firmware, the
UEFI firmware, and the Lenovo XClarity Provisioning Manager software.

Note:

By default, the Lenovo XClarity Provisioning Manager Graphical User Interface is displayed when

you start the server and press the key specified in the on-screen instructions. If you have changed that
default to be the text-based system setup, you can bring up the Graphical User Interface from the text-
based system setup interface.

Additional information about using Lenovo XClarity Provisioning Manager to update firmware, see:

“Firmware Update” section in the LXPM documentation compatible with your server at

sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html

•

Lenovo XClarity Controller

If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific
server.

Notes:

– To perform an in-band update through Windows or Linux, the operating system driver must be installed

and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.

Additional information about configuring Ethernet over USB, see:

“Configuring Ethernet over USB” section in the XCC documentation version compatible with your
server at

https://sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html

– If you update firmware through the Lenovo XClarity Controller, make sure that you have downloaded

and installed the latest device drivers for the operating system that is running on the server.

For additional information about using Lenovo XClarity Controller to update firmware, see:

“Updating Server Firmware” section in the XCC documentation compatible with your server at

sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html

•

Lenovo XClarity Essentials OneCLI

Lenovo XClarity Essentials OneCLI is a collection of command line applications that can be used to
manage Lenovo servers.Its update application can be used to update firmware and device drivers for your
servers. The update can be performed within the host operating system of the server (in-band) or remotely
through the BMC of the server (out-of-band).

For additional information about using Lenovo XClarity Essentials OneCLI to update firmware, see:

http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_c_update.html

System configuration

71

«
...
77
78
79
80
81
...
»

Содержание 7X15









































































































Отзывы:

Нет отзывов

Похожие инструкции для 7X15

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 43

Бренд: AOpen Страницы: 20

Бренд: 7starlake Страницы: 32

Бренд: Compaq Страницы: 222

Essentio CG5275

Бренд: Craftsman Страницы: 26

Бренд: Craftsman Страницы: 8

Бренд: StarTech.com Страницы: 29

Бренд: Technologic Systems Страницы: 35

RTM-ATCA-748x-40G

Бренд: SMART Embedded Computing Страницы: 2

RY883AA#ABA - Compaq Presario - SR5002HM

Бренд: HP Страницы: 1

RY883AA#ABA - Compaq Presario - SR5002HM

Бренд: HP Страницы: 2

Envy Recline23 TouchSmart Beats SE All-in-One

Бренд: HP Страницы: 5

ENVY Phoenix 850

Бренд: HP Страницы: 11

Бренд: HP Страницы: 2

Envy Phoenix 800

Бренд: HP Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды