7. Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note:
A certified power supply cord has to be used with this equipment. The relevant national
installation and/or equipment regulations shall be considered. A certified power supply cord not
lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation
H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be
of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.
8. Assembled cables with Line Cleaner as shown below.
9. Power on the monitor and the computer.
10. To install the monitor driver, you must download it from Lenovo website
，
(http://support.lenovo.com/docs/P27q_20) and follow the instructions on page 3-5.
Registering your option
Thank you for purchasing this Lenovo
®
product. Please take a few moments to register your product
and provide us with information that will help Lenovo to better serve you in the future. Your
feedback is valuable to us in developing products and services that are important to you, as well as
in developing better ways to communicate with you. Register your option on the following Web site:
http://www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless you indicate on
the Web site questionnaire that you do not want to receive further information.
1-6 P27q-20 Flat Panel Monitor User’s Guide
