25
Using the peer-to-peer method
With this method, the printer driver is fully installed on each client
computer. Network clients retain control of driver modifications. The client
computer handles the print job processing.
1
Follow the instructions on the Setup sheet to install the hardware
and software on the host computer.
2
From the host computer, click Start
Æ
Settings
Æ
Control Panel.
3
Select Network and Dial-up Connections.
4
Select the network connection.
5
Click Properties.
6
Make sure a check mark appears next to File and Printer Sharing
for Microsoft Networks.
If no check mark appears, click the box next to File and Printer
Sharing for Microsoft Networks.
7
Click OK.
8
From the client computer, insert the printer software CD.
9
Follow the instructions on the client computer screen.
10
Select Printer is on a network when asked how the printer is
connected to the computer.
11
Select Peer to Peer when asked how the printer is connected to the
network.
12
Repeat steps 8 through 11 for each of the client computers.
Using the point-and-print method
With this method, the printer driver is partially installed on each of the client
computers networked to the host computer. The host computer controls
driver changes and handles print job processing.
Содержание 4330
Страница 1: ...User s Guide 4330 Inkjet Printer User s Guide ...
Страница 28: ...28 2 Press down on the cartridge lever to raise the cartridge lid 3 Remove the old cartridge and dispose of it ...
Страница 30: ...30 4 Snap the lid closed 5 Close the access cover Note The access cover must be closed to start a print job ...
