Lenovo 30BX, Руководство пользователя

Страница: 77 / 150

Front bezel
Attention: Do not open your computer or attempt any repair before reading and understanding the “Read
this first: Important safety information” on page v.
To remove and install the front bezel, do the following:
1. Prepare your computer. See “Preparing your computer and removing the computer cover” on page 61.
2. Release the three plastic tabs on the left side and pivot the front bezel outward to remove it from the
computer.
Figure 10. Removing the front bezel
3. To install the front bezel, align the three plastic tabs on the right side of the front bezel with the
corresponding holes in the chassis. Then pivot the front bezel inwards until it snaps into position on the
left side.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 108.
Power button
Attention: Do not open your computer or attempt any repair before reading and understanding the “Read
this first: Important safety information” on page v.
To remove and install the power button, do the following:
1. Prepare your computer. See “Preparing your computer and removing the computer cover” on page 61.
2. Remove the front bezel. See “Front bezel” on page 63.
3. Locate the power button. See “Computer components” on page 5.
4. Disconnect the power button cable from on the system board. See “Parts
on the system board” on page 6.
Chapter 7
.
Hardware removal and installation
63
the front-bezel connector