Lenovo 30BA Скачать руководство пользователя страница 215

Страница: 215 / 254

b. Flex both sides of the retainer downward to release the microprocessor from the retainer

. Then, lift

the microprocessor off the retainer

Notes:

• Your microprocessor might look different from the one illustrated.

• Touch only the edges of the microprocessor. Do not touch the gold contacts.

Figure 196. Removing the microprocessor from the bracket

c. Carefully wipe the thermal grease off the old microprocessor. Place the old microprocessor on a

static-protective surface.

6. To install a new microprocessor, do the following:

a. Remove the microprocessor socket cover if it is installed.

Figure 197. Removing the microprocessor socket cover

b. Touch the static-protective package that contains the new microprocessor to any unpainted surface

on the outside of the computer. Then, remove the new microprocessor from the package.

Chapter 9

Hardware removal and installation

209

Содержание 30BA































































































































































































































































Результаты поиска

Содержание 30BA

Отзывы:

Бренды по названию

Популярные бренды

Lenovo 30BA, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание 30BA

Отзывы:

Бренды по названию

Популярные бренды