Lenovo 300e Chromebook 2nd Gen Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 62

Lenovo 300e Chromebook 2nd Gen Скачать руководство пользователя страница 10

• Use a grounded work mat to provide a static-free work surface. The mat is especially useful when

handling ESD-sensitive devices.

• Select a grounding system, such as those listed below, to provide protection that meets the specific

service requirement.

Note:

The use of a grounding system to guard against ESD damage is desirable but not necessary.

– Attach the ESD ground clip to any frame ground, ground braid, or green-wire ground.
– When working on a double-insulated or battery-operated system, use an ESD common ground or

reference point. You can use coax or connector-outside shells on these systems.

– Use the round ground prong of the ac plug on ac-operated computers.

Grounding requirements

Electrical grounding of the computer is required for operator safety and correct system function. Proper
grounding of the electrical outlet can be verified by a certified electrician.

Safety notices (multilingual translations)

The safety notices in this section are provided in the following languages:
•  English
•  Arabic
•  Brazilian Portuguese
•  French
•  German
•  Hebrew
•  Japanese
•  Korean
•  Spanish
•  Traditional Chinese

DANGER

DANGER

4

Hardware Maintenance Manual

«
...
8
9
10
11
12
...
»

Содержание 300e Chromebook 2nd Gen































































Отзывы:

Нет отзывов