Lenovo 3000 H200 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 58

background image

Appendix. Statement

55

Welcome to contact us for any inconsistency between the product and all
the manuals included with your computer. For the latest information or
any questions or comments, contact or visit Lenovo website:

Service website: http://www.lenovo.com

Lenovo is trademark of Lenovo (Beijing ) Co., Ltd.

Microsoft is the registered trademark of Microsoft.

Microsoft Windows XP is the Windows XP-
registered trademark of Microsoft Corporation.

Intel Inside is the registered trademark of Intel.

AMD and the logo,

AMD Athlon™, and

AMD Opteron™

AMD, the AMD logo, AMD Athlon and AMD
Opteron are trademarks or registered trademarks
of Advanced Micro Devices.

This is description of trademarks or registered trademarks of Lenovo and
its partners.

Other registered trademarks mentioned in all the manuals included with
your computer belong to the specific company respectively.

All rights reserved.

All the manuals included with your computer is protected by copyright
laws. Any part of all the manuals included with your computer may not be
reproduced or copied by any means without prior written permission of
Lenovo (Beijing) Co., Ltd.

Names or marks of certain companies mentioned in all the manuals
included with your computer or this document are only used to state
trademark rights, and they will not necessarily indicate that related
software or hardware is included. The concrete configuration of the
product depends on the description of packing list.

«
...
56
57
58

Содержание 3000 H200



























































Отзывы:

Нет отзывов

Похожие инструкции для 3000 H200

Бренд: Igel Страницы: 2

Бренд: iDOT Страницы: 66

Бренд: Gateway Страницы: 164

System x3200 M3

Бренд: IBM Страницы: 42

FLEX-BX100-ULT5

Бренд: IEI Technology Страницы: 121

Adjustable Height Workstation

Бренд: Rockler Страницы: 8

Workstation Fusion 7000

Бренд: MAXDATA Страницы: 46

Бренд: Kontron Страницы: 68

Бренд: Alienware Страницы: 20

Бренд: Newport Страницы: 55

Бренд: MSI Страницы: 71

Бренд: Partners Страницы: 3

Бренд: Vivo Страницы: 3

Бренд: Sinocan Страницы: 41

Flex Insight XMS

Бренд: Spectrum Industries Страницы: 11

Бренд: Colormetrics Страницы: 70

Бренд: Fanvil Страницы: 57

Бренд: Fanvil Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды