Lenovo 20NN001RUS, Руководство пользователя, Страница: 61 / 108

a. Run the iRST Console with Device Driver.
b. Click Intel Optane Memory and then follow the instructions on the screen to disable it.
2. Disable the built-in battery. See “Disable Fast Startup and the built-in battery” on page 49.
3. Turn off the computer and disconnect the computer from ac power and all connected cables.
4. Close the computer display and turn the computer over.
5. Remove the base cover assembly. See “Base cover assembly” on page 50.
6. Remove the screw that secures the M.2 solid-state drive 1 . The M.2 solid-state drive is released from
the secured position and pivots upward. Then, remove the M.2 solid-state drive out of the slot 2 .
7. Install a new M.2 solid-state drive by doing the following:
a. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then, carefully insert
the drive into the slot at an angle of about 20 degrees 1 .
b. Pivot the M.2 solid-state drive downward and install the screw to secure the M.2 solid-state drive 2 .
8. Reinstall the base cover assembly.
9. Turn the computer over. Connect the ac power adapter and all disconnected cables to the computer.
Notes: If you install a new hybrid solid-state drive (with Intel Optane memory), enable Intel Optane memory
by doing the following:
1. Restart your computer. When the logo screen is displayed, immediately press F1 to enter the UEFI BIOS
menu.
2. Select Config ➙ Storage ➙ Controller mode . Ensure that RST mode is selected.
3. Go to
https://support.lenovo.com
. Download and install the Intel Rapid Storage Technology (iRST)
Console with Device Driver on your computer.
Chapter 7
.
CRU replacement
55