Lenovo 100S Chromebook-11IBY, Руководство по техническому обслуживанию аппаратной части

Страница: 39 / 56

g
Figure 19. Remove the DC-in cable
Table 8. Screw specifications — removing the LCD module
Screw
label Specifications Color Torque
5
M2 ×3 mm, flat-head, nylon-coated Black 1.85 +/- 0.15kgf-cm
Refer to Table 3 “Part numbers for FRUs (CRUs)” on page 22 to look up the Lenovo part numbers of the
following replacement parts:
System board
DC-in cable
Base cover
Remove the touch pad module
“Remove the upper case and the battery” on page 25
Step 1. Open the socket 1 , pull out the touch pad cable 2 , and then peel off the touch pad cable from
the upper case.
b
a
Figure 20. Remove the touch pad module
Step 2. Remove the three screws 4 , and then remove the touch pad holder in the direction shown by
arrow 5 .
Chapter 4
.
Removing a FRU or CRU
33