3
Figure 6. Secure Transformer
7. Position the transformer on the back of the control
box and secure with the two long screws. See
Figure 6.
8. Route wiring under main control board and
terminal strip assembly and through the white
plastic grommet. See Figure 7.
Figure 7. Route Wiring Through Grommet
White
Plastic
Grommet
9. Connect the red wire spade terminal to L1 and
connect the black wire spade terminal to L2 on the
VVC* terminal block. See Figures 8 and 9.
Figure 8. Connect Heat Kit to L1 & L2
Figure 10. VVCA***H41P Connect Heat Kit to CN 14
10. Connect the red plug to the appropriate connection
point on the indoor unit’s main board, see table below.
Unit
CN
Figure #
VVCA CN 14 Figures 10 and 11
VVCB CN 12 Figure 12
Figure 9. Heat Kit Connected to L1 & L2
Red Wire
Spade
Connector
L1
Black Wire
Spade
Connector
L2
Figure 11. VVCA***H42P Connect Heat Kit to CN 14
Figure 12. VVCB***H43P Connect Heat Kit to CN 12
