25
FCC Compliance Statement
PART 15.19 This device complies with Part 15
of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interfer-
ence, and
2. 2. This device must accept any interference re-
ceived, including interference that may cause
undesired operation. FCC Interference State-
ment — PART 15.105 (B).
3. 3. This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference in
a residential installation.
4. 4. This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the in-
structions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or televi-
sion reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one of the following measures:
•
Reorient or relocate the receiving anten-
na.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced ra-
dio/TV technician for help.
RF Exposure Information
This device meets the FCC and ISED requirements
for RF exposure in public or uncontrolled
environments.
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
