3
SELECTING UNIT OPERATING MODE AND SET-POINT TEMPERATURE
AUTO
On / Off
A ) HOW TO TURN ON/OFF THE UNIT
The button allow the increase of the current set-point by 1ºC/1ºF
The button allow the decrease of the current set-point by 1ºC/1ºF
The temperature range is from 16ºC/60ºF to 30ºC/85ºF
Starting operation:
When the unit is off, press the ON/OFF button. The operation
LED lights and the unit will be turned on.
Stopping operation:
When the unit is on, press the ON/OFF button. The operation
LED is extinguished and controls are turned off.
Operating Lamp
B) SELECTING THE UNIT'S OPERATING MODE
C) SELECTING DESIRED ROOM TEMPERATURE (SET-POINT)
If unit is working, the
or buttons
allow to select the desired room temperature (set-point)
When the button or are pressed one, the display will show the selected desired
temperature (set-point) during 5 seconds, after that the display will show the room temperature
SET TEMP
D) SELECTING THE FAN OPERATING MODE
Pressing button scrolls through the
following modes, and we can selected
the one desired
FAN
To change from ºC to ºF or vice versa, press the buttons y at the same time
SET TEMP
The operating mode is always indicated on the display
Pressing the
mode
button repeatedly you can change the unit operating mode, and choose the one desired:
COOL:
The unit is working on cooling mode, when compressor is working symbol will appear on the display
HEAT:
The unit is working on heating mode, when compressor or electrical heater is working symbol will appear
on the display
AUTO:
The system automatically switches from cooling to heating mode, depending on the position of the ambient
temperature in respect to the set-point, the symbol will appear on the display and also the symbols or
depends on the operating mode selected
DRY:
The symbol will appear on the display
FAN:
Fan control only; when fan is working the symbol will appear
ON / OFF
SET CLOCK
MON TUE WED THU FRI SAT
SUN
KEY
LOCK
TIMER ACTIVE
SET TIMER
AUTO
HEAT
HEAT
TEMP.
ROOM
TEMP.
AUTO
COOL
TEMP.
DRY
COOL
SLEEP
SWING
FAN
NOTE: If we have selected FAN as the unit operating mode, the SET POINT can not be modified
SET TEMP
To be able to select a fan operating mode, cool, heat or auto unit's operating mode must be selected.
If DRY mode have been selected the fan operating mode can not be selected.
If Fan mode have been selected the automatic fan operating mode can not be selected
AUTOMATIC: The fan selects the most appropriated fan speed
HIGH
LOW
MEDIUM
NOTE: Even when a low speed have been selected on heating mode, the unit self protective changing automatically
to a higher fan speed, when the unit is working at high temperatures.
Cool
Dry
Heat
Fan
Auto
SET TEMP