background image

USER'S INFORMATION MANUAL

Gas-Fired Furnace

READ ALL INSTRUCTIONS IN THIS MANUAL AND RETAIN THIS AND ALL ADDITIONAL INSTRUCTIONS FOR FUTURE REFERENCE.

Congratulations...

...you have one of the most modern gas furnaces made.
Your unit has been carefully selected to keep you warm
and comfortable during the winter months. It will deliver
superb performance with only minimal help from you.

To keep your operating costs low and to eliminate
unnecessary service calls, we have provided a few
guidelines. These guidelines will help you understand
how your gas furnace operates and how to maintain it so
you can get years of safe and dependable service.

GAMA Certified

The Gas Appliance Manufacturers Association (GAMA)
symbol verifies that Annual Fuel Utilization Efficiency
(AFUE) ratings for our gas furnaces have been derived
from U.S. Government standard tests.

CSA International Design Certified

The CSA International symbols on each nameplate is
your assurance that your furnace design meets nationally
recognized standards for safety and performance.

Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.

— What to do if you smell gas:

 • Do not try to light any appliance.
 • Do not touch any electrical switch; do

not use any phone in your building.

 • Leave the building immediately.
 • Immediately call your gas supplier from

a neighbor's phone. Follow the gas
supplier's instructions.

 • If you cannot reach your gas supplier,

call the fire department.

— Installation and service must be

performed by a qualified installer,
service agency or the gas supplier.

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly
could result in serious injury death or
property damage.

TABLE OF CONTENTS

SAFETY

. . . . . . . . . . . . . . . . . . . . . . . . . .  2

OPERATING YOUR FURNACE . . . . . . . . . . .  2

Lighting Instructions . . . . . . . . . . . . . . . . .  2
Temperature Control . . . . . . . . . . . . . . . . .  3
Fan Operation . . . . . . . . . . . . . . . . . . . . .  3

MAINTENANCE OF YOUR FURNACE . . . . . .  4

Periodic Inspections . . . . . . . . . . . . . . . . .  4
Cleaning/Replacing the Filter . . . . . . . . . . .  5
Parts Replacement Guide . . . . . . . . . . . . .  6

20541401

                         issue 0229 

                                                                                 Page 1 of 6

Содержание MPGA 050 B3






































Отзывы: