Page 2
ML180UHE Parts Identification
HEAT EXCHANGER
ASSEMBLY
BURNERS
BLOWER
MOTOR
GAS VALVE AND
MANIFOLD
COMBUSTION AIR
INDUCER
TOP CAP
INTEGRATED
CONTROL
PRESSURE SWITCH
BLOWER ACCESS
PANEL
UPPER ACCESS
PANEL
FIGURE 1
NOTE -
This manual is the property of the homeowner
and must be left with the equipment user.
Notice to Homeowner
This furnace is equipped with safety devices that protect
you and your property. If one or more of these devices
is activated, furnace operation will stop. If your home is
left unattended for an extended period of time, equipment
operation must be checked periodically. If this is not possi
-
ble, the water supply to the house should be shut off and
the pipes should be drained. This will prevent problems
associated with a NO HEAT condition (frozen pipes, etc.)
CAUTION
Before attempting to perform any service or
maintenance, turn the electrical power to unit OFF
at the disconnect switch.
NOTICE
Any additions, changes, or conversions required
in order for the appliance to satisfactorily meet
the application needs must be made by a licensed
professional installer (or equivalent) using factory-
specified and approved parts.
