Lennox HS29-012, Информация об устройстве

Страница: 15 / 20

Page 15
VI − WIRING DIAGRAMS AND SEQUENCE OF OPERATION
HS29−1 SINGLE-PHASE OPERATING SEQUENCE
(
RECIPROCATING OR ROTARY COMPRESSOR)
a−HS29 P" Voltage Operation Sequence
This is the sequence of operation for HS29−461/511/651 and HS29−012/018/024 P" voltage units. The
HS29−141/211/261/311/411/681 P" voltage units are similar; however, these units are not equipped with the hard
start kit. The sequence is outlined by numbered steps which correspond to circled numbers on the adjacent dia-
gram.
NOTE− The thermostat used may be electromechanical or electronic.
NOTE− Transformer in indoor unit supplies power (24 VAC) to the thermostat and outdoor unit controls.
COOLING:
2Cooling demand initiates at Y1 in the thermostat.
324VAC from indoor unit energizes compressor contactor K1.
4K1-1 N.O. closes, energizing terminal C" of compressor (B1) and outdoor fan motor (B4).
5Outdoor fan motor (B4) begins immediate operation.
6Compressor (B1) begins start-up. Hard start contactor K31 remains closed during start-up and start capacitor C7 remains in
the circuit. As the compressor gains speed, K31 is energized. When K31 is energized, the contacts open and start capaci-
tor C7 is taken out of the circuit.
END OF COOLING DEMAND:
7Cooling demand is satisfied. Terminal Y1 is de-energized.
8Compressor contactor K1 is de-energized.
9K1-1 opens and compressor (B1) and outdoor fan motor (B4) are de-energized and stop immediately.
5
6
7
8
1
2
3
4