Lennox Comfair HC, Руководство по эксплуатации

Страница: 10 / 24

Remove the appliance from the point of installation, drill the holes where marked on the wall (see fig. 8) and insert
the screw anchors. Place the appliance against the wall and fix it by tightening the screws into the anchors (see fig.
9). Carry out the water and electrical connections as described in the relevant paragraphs. To replace the housing,
proceed according to instructions given below.
Fig. 08
Insert the lugs A into the relative slots B (fig. 11). Pivot the housing on its base until it is aligned with the wall.
Raise the flaps covering the control panel and the water connections and tighten the two fixing screws (fig. 5).
Fig. 10
Take the housing from the packing box. Standing in front of the fan coil, lift the housing, holding it by the sides, and
tilt it (fig. 10).
Fig. 11
Fig. 09
2
B
A
INSTALLATION
- OPERATING &
MAINTENANCE
MANU A L
Page 8