Page 3
CBX32M SERIES
CBX32M Horizontal Left− and Right−Hand Unit Dimensions − Inches (mm)
LIQUID
LINE
SUCTION
LINE
Supply
Air
Opening
Filter
LOW VOLTAGE
INLETS (BOTTOM
AND RIGHT
SIDE)
Top View
Front View
Blower
H
B
C
D
LIQUID
LINE
SUCTION
LINE
CONDENSATE
DRAINS (2)
(UPFLOW AND
DOWNFLOW)
CONDENSATE
DRAINS (2)
(HORIZONTAL)
Coil
3/4
(19)
3/4
(19)
1-1/2
(38)
1-3/4
(44)
5-3/4
(46)
2
(51)
1-1/8
(29)
Return
Air
Opening
F
E
5/8
(16)
5/8
(16)
5/8
(16)
End View
Air
Flow
OPTIONAL ELECTRIC
HEAT (FIELD−INSTALLED)
11-1/16
(281)
LINE VOLTAGE
INLETS (TOP
AND RIGHT
SIDE)
5-3/8
(137)
4-3/8
(111)
LIQUID
LINE
SUCTION
LINE
Supply
Air Opening
FILTER
LOW VOLTAGE
INLETS (TOP
AND LEFT SIDE)
End View
Blower
B
C
D
Coil
3/4
(19)
3/4
(19)
3/4
(19)
Return
Air Opening
F
E
5/8
(16)
5/8
(16)
5/8
(16)
End View
Air Flow
OPTIONAL ELECTRIC
HEAT (FIELD INSTALLED)
LINE VOLTAGE INLETS
(BOTTOM AND LEFT SIDE)
Horizontal Position (Right-Hand Air Discharge)
FILTER ACCESS
FILTER
ACCESS
5-3/4
(146)
1-1/2
(38)
1-3/4
(44)
CONDENSATE DRAINS (2)
(HORIZONTAL)
A
5/8
(16)
G
H
A
5/8 (16)
G
1
(25)
1
(25)
11-1/16
(281)
PIPING PLATE
DETAIL
LIQUID
LINE
SUCTION
LINE
2
(51)
1-1/8
(29)
5-3/8
(137)
4-3/8
(111)
PIPING PLATE
DETAIL
Horizontal Position (Left-Hand Air Discharge)
Top View
Front View
3/4
(19)
End View
FOR DIMENSIONS A" THROUGH
H", SEE CHART ON PAGE 2.
General
The Lennox Elite
®
Series CBX32M air handler units are
designed for installation with a matched remote outdoor
unit that is charged with HFC−410A refrigerant and optional
field−installed electric heat. The air handler units are for
indoor installation only.
These instructions are intended as a general guide and do
not supersede local or national codes in any way. Consult
authorities having jurisdiction before installation. Check
equipment for shipping damage; if found, immediately
report damage to the last carrier.
Shipping and Packing List
Package 1 of 1 contains the following:
1
Assembled air handler unit
Requirements
In addition to conforming to manufacturer’s installation
instructions and local municipal building codes, installation
of Lennox air handler units (with or without optional electric
heat), shall conform with the following National Fire
Protection Association (NFPA) standards:
S
NFPA No. 90A − Standard for Installation of Air
Conditioning and Ventilation Systems
