Lennox A111C, Руководство пользователя, Страница: 6 / 20

5
SELECTING UNIT OPERATING MODE AND SET-POINT TEMPERATURE
clock
set
mode
fan
hold
resume
To be able to select a fan operating mode, cool, heat or auto unit's operating mode must be selected
Pressing FAN side button scrolls through the following modes: FAN CONSTANTLY ON, or AUTO
FAN CONSTANTLY ON
Fan is continuous ON, the symbol will appear.
AUTO:
Fan on and off together with the compressor, the symbol will appear.
1
aut
The operating mode selected is active 5 seconds from setting,
when the respective sign stops flashing.
A ) SELECTING THE UNIT'S OPERATING MODE
C ) SELECTING THE FAN OPERATING MODE
B ) SELECTING DESIRED ROOM TEMPERATURE (SET-POINT)
The operating mode is always indicated on the display.
Pressing the mode button repeatedly you can change the unit operating mode:
COOL: The unit is working on cooling mode, when compressor is working, the symbol will appear
on the display.
HEAT: The unit is working on heating mode, when compressor or electrical heater are working, the
symbol will appear on the display.
AUTO: The system automatically switches from cooling to heating mode, depending on the position of
the ambient temperature in respect to the set-point.
FAN: The unit will work on fan mode; When fan is working the symbol will appear.
OFF: The thermostat switches the unit off, the symbol appears on the display .
aut
set
Fan operating mode
1
set
If unit is working, the or buttons allow to select the desired room temperature (set-point).
The button allows the increase of the current set-point by 0.5ºC.
The button allows the decrease of the current set-point by 0.5ºC.