Lencore MPI-2 LOCAL, Руководство пользователя

Страница: 8 / 20

Wiring
To Global MPI
The addition of a Global MPI-2 is optional. The Global MPI-2 allows the user to
page all buildings with a Global MPI-2 simultaneously. The
“To Global” MPI
connector is for communicating to the Global MPI.
Wire the “TO GLOBAL MPI” to
the Global MPI’s “TO LOCAL MPI” connector using an RJ45 cable.
Microphone Input
The microphone input is for a dynamic microphone.
Connect a microphone to the “MIC” connector using individual wires from the
microphone.
SIG+/SIG- = MIC audio
SHLD
– MIC shield
SW/SW = MIC key switch
5