XEMIO-260 USER MANUAL
3
F. Troubleshooting
G. Technical Specifications
Interface
USB2.0(FS)
（
Read 1000K Byte
，
Write 800K Byte
）
Capacity
Flash memory
：
4GB
Earphones
output
power
（
L
）
10mW
＋（
R
）
10mW
（
32Ohm
）
MP3 bitrate
8K bps – 320K bps
WMA Bitrate
5K bps – 384K bps
Frequency response
20Hz
至
20KHz
MP3
、
WMA
Single noise Ratio
85dB
File type
MP1
、
MP2
、
MP3
、
WMA
Working temperature
-5 to 40°C
Supported operation system
Windows98/SE/ME/2K/XP MAC OS 9.2 or above
Note: Product design and specification are subject to change without prior notice.
For information and support, www.lenco.eu
No Power
1. Check if battery is low.
2. Check if the player is ON.
No sound from
earphone
1. Check to see Volume is set “0” and connect the earphone
connects properly.
2. Make sure earphone is clean and in good status.
3. Damaged MP3 file may make noise and could not be played
Make sure that the music files are not damaged.
Failure of music
download
1. Check if USB cable is damaged and connected properly.
2. Check if driver is installed correctly.
3. Check if memory space is enough.
