LENCO SCD-430RD, Руководство пользователя

Страница: 11 / 101

DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 6 pcs UM - 1/D size
batteries (not included) into compartment. Please follow correct
polarities as indicated.
CAUTION
⚫
Remove batteries if they are flat or not being used for a long
period of time.
⚫
Batteries contain chemical substances, so they should be disposed
of properly.
BASIC FUNCTION
SWITCHING ON THE UNIT
⚫
Set the FUNCTION switch to CD/MP3/AUX or RADIO.
⚫
In CD/MP3/AUX position, when the unit is not providing the main
function for 15 minutes, the unit will automatically switch into
standby mode. Press the
PLAY/PAUSE/ button to turn on the
unit again.
REMARK:
⚫
Please note that low volume setting in the audio source may be
recognized as “no audio signal”, this will affect the capability of
signal detection from the device and can also originate an
automatic switch into standby mode. If this happens please
reactivate the audio signal transmission or increase the volume
setting on the audio source player in order to resume playback.
⚫
Electrostatic Discharge hints – The unit may reset or may not reset
to normal operation mode due to electrostatic discharge, just
switch it off and reconnect again.
TO ADJUST VOLUME
Rotate the VOLUME CONTROL back and forth to increase and
decrease volume.