1. Press
the
STANDBY button.
3 . On your Bluetooth device, activate Bluetooth and
search for LENCO SCD-32 BT. The bluetooth LED
indicator flashes during pairing.
4. Connected : Bluetooth LED indicator is always light
on.
5. After successful coonection,start music play on the
Bluetooth device.
GB 5
PROGRAMMED PLAYBACK
PROGRAMMED PLAYBACK
Programmed playback enables tracks on a disc to be played
in the desired order. Up to 20 tracks can be programmed.
1. Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select the
desired track number.
3. Press the " PROGRAM " button again to memorize
the track.
4. Repeat steps 2 and 3 until all desired tracks are
programmed.
5. Press the " PLAY/PAUSE " button to start.
" " , " PROG " & track number are shown on
the CD display.
6. Press the " STOP " button once to stop programmed
playback.
7. Press the " PLAY/PAUSE " button to resume
programmed playback.
8. Open the CD door, turn off the CD player or press the
" STOP " button twice to clear the programmed
memory.
Note : Programming can only be made when the player
is in stop mode.
" PROGRAM "
CD display
Note on CD-R/RW discs
- Because of non-standardized format definition/ production of CD-R/RW, playback quality and performance are not
guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions, such as PC performance,
writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- It is recommended to record only audio files on CD-R/RW discs for easy reading.
PROGRAM
STANDBY
2 . Set to BLUETOOTH, the " BT " is shown on
the display.
LCD display
" BLUETOOTH "
BLUETOOTH OPERATION
-
Next time you switch on the unit, the speaker connects to the last paried device automatically.
-
The music streaming may be interrupted by obstacles between the device and the unit, such as walls, or other devices
nearby that operate in the same frequency.
Unit will be automatically off after 10 mins without further operation .