ADJUSTING THE SOUND
POWER SUPPLY
GB 2
TO ADJUST THE VOLUME
USING HOUSE CURRENT
Before use, check that the rated voltage of your unit matches
your local voltage.
Note: Plug is used as the disconnect device.
The disconnect device shall remain readily
operable.
USING BATTERIES
Disconnect the AC power cord from the AC inlet of the
unit. Battery power is cut automatically by the cord while
it is connected.
Insert 6 UM-2
( size C ) batteries.
battery door
When the volume decrease, or the sound distorts, replace
all of the batteries with new ones.
FOR PRIVATE LISTENING
Plug in headphones (ø3.5 mm stereo mini-plug) to the
PHONES jack.
When headphones are plugged in, the speakers are
automatically disconnected.
To AC socket
To AC outlet
VOLUME
MAX.
MIN.
VOLUME
TURN ON / OFF THE SYSTEM
STANDBY
LCD display
Press the STANDBY button to turn the audio on.
To change the audio mode between CD, RADIO AND
BLUETOOTH ,set the FUNCTION switch while the power is on.
The audio mode is displayed.
Turn off the unit by pressing the STANDBY button.
" OFF " word will be shown on the display
and then resume the current time.
The clock is displayed on LCD display at standby mode.
1. Press and hold the PROGRAM / CLOCK-ADJ. button.
2. Press the NEXT or BACK to select 12 hours or 24 hours display.
3. Press the PROGRAM / CLOCK-ADJ. button, the hour digit flash.
4. Press the NEXT or BACK to adjust hour digit.
5. Press the PROGRAM / CLOCK-ADJ. button, the minute digit flash.
6. Press the NEXT or BACK to adjust minute digit.
7. Press the PROGRAM / CLOCK-ADJ. button again, the correct time is shown on display.
CLOCK ADJUSTMENT
LCD display
CLOCK-ADJ.