LENCO MDV-3, Инструкция по эксплуатации

Страница: 16 / 24

- 16 -
MENU SETUP
Press the Setup button on the remote controller to open the menu setup function, the TV screen will
display the following figures,
SYSTEM SETUP PAGE
1). TV System
perform adjustment according to different disc applicable for different TV system,
includes four options: NTSC, PAL, PAL60, AUTO.
2). Screen Saver
this option is used to open or close screen saver program, includes: ON and OFF.
3). Video Output
according to your requirement, you can input different video source, includes 5 modes:
INTERLACE-YUV, S-VIDEO,P-SCAN,S-VIDEO,PC-VGA
(1) INTERLACE-YUV: this option can be chosen if Y, Cb, Cr are connected with TV
(2) P-SCAN: this option can be chosen when Y, Pb, Pr are connected with TV and the
TV is set in P-SCAN mode.
NOTE: only when the TV has progressive scan function, you can use P-SCAN.
4). TV Type
please select the right screen type according to your TV, including 3 options,
4:3 LB: mailbox format, the picture data will panoramic and scanning format will be
played in this format. (Fig. 1)
4:3 PS: for regular TV, the picture data with panoramic and scanning format will be
played in this format. (Fig. 2)
16:9: for wide screen TV, to be played in full size. (Meanwhile, it is necessary to set the
TV to FULL status.) (Fig. 3)
As shown above, each screen type is presented by one example.
Such setting will not affect the normal size of the picture data.