8
Disabling the timer
To cancel the alarm after it has sounded press the “POWER” button or the “TIMER” button.
To cancel the timer before the alarm has sounded press the “TIMER” button until the display shows “000”
and the timer light is no longer lit.
CD OPERATION
1. Turn the device on and press the “SOURCE” button to switch to CD mode.
2. Press the “OPEN/CLOSE” button to open the CD tray.
3. Place a CD into the tray with the label side facing up.
4. Press the “OPEN/CLOSE” button again to close the CD tray. The CD will starts playing
automatically.
5. Press the “PLAY/PAUSE” button to interrupt the playback. Press the button again to resume
playing.
6. Press the “SKIP/TUNE
/
” buttons to select a track.
7. Press the “STOP
” button to stop the play mode.
Programming a CD
1. Press the “STOP
” button to stop the CD during play.
2. Press the “PROG” button.
3. “Prog” will begin to blink on the display.
4. Press the “SKIP/TUNE
/
” buttons to select a track.
5. Press the “PROG” button to save the selected track to the program.
6. Repeat step 4 and 5 to program up to 20 tracks.
7. If you are ready press the “PLAY/PAUSE” button to start playing the programed titles.
Repeat Function
Repeat one track on Music CD
1. During CD playback press the “SKIP/TUNE
/
” buttons to select the track which you
want to repeat.
2. Press the “REPEAT” button until the “
1” indicator shows on display. The unit will play the selected
track repeatedly.
3. To cancel the setting press the “REPEAT” button continuously until the “
1” or “ ALL” indicators
disappear.
Repeat the entire DISC
1. During CD playback press the “REPEAT” button continuously until the
“ ALL” indicator shows on the
display. The unit will play all tracks on the disc repeatedly.
2.
To cancel the setting press the “REPEAT” button continuously until the “ 1” or “ ALL” indicators
disappear.
RADIO
To improve the best FM radio reception try altering the position/length of the FM wire antenna.
