LENCO DVT-224, Руководство пользователя

Страница: 37 / 38

NOTE: There is a problem in VGA mode.(Only VGA mode applied) NOTE: There is a problem in VGA mode.(Only VGA mode applied)
PROBLEM POSSIBLE SOLUTION PROBLEM POSSIBLE SOLUTION
The signal is out of range.
- Adjust resolution, horizontal frequency, or vertical frequency.
- Check whether the signal cable is connected or loose.
- Check the input source.
Vertical bar or stripe on
back ground&Horizontal
Noise&Incorrect position.
- Work the auto configure or adjust clock, phase, or H/V position.
Screen color is unstable
or single color.
- Check the signal cable.
- Reinstall the PC video card.
Maintenance Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the screen Cleaning the screen
1. Here ’ s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it ’s almost dry, and then
used it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the cabinet Cleaning the cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence Extended Absence
If you expect to leave your TV dormant for a long time(such as a vacation), it ’s a good idea to
unplug the power cord to protect against possible damage from lightning or power surges.
35
36
Specifications
Panel Features
Screen Size 22 inch
Active Area
473.76mm(H) X 296.1mm(V)
Aspect Ratio
16:10
Panel Resolution 1680 X 1050
Brightness 300 cd/m²
Contrast Ratio
700:1
Viewing Angle 176º(H) X 176º (V)
Dot Pitch
0.282mm(H) X 0.282mm(V)
Maximum Colour 16.7M
Response Time Black-White (R&D) 5ms
OSD Languages
English, French Spanish German Holland
TV Function
Broadcast System
PAL/SECAM(PAL plus not supported)
Receiving Channel
Video Standards Supported
Composite Video input
NTSC / PAL / SECAM
NTSC / PAL / SECAM
S-Video Input
Antenna (RF)
Audio Output
Speaker (Built-In)
Input Connections
TV Input (Analogue TV Antenna) 1 (RF - 75 Ohm)
YPbPr
1 (3 pin)
DVB BUILT-IN
VGA Input 1 (15 pin D-Sub)
SCART Input 1 (21 pin SCART)
L + R Audio Input (For AV S-Video )
PC Audio in
1 (White RCA, Red RCA)
Stereo Mini Phono Jack Input (3.5mm)
VGA Resolutions Supported
640x480 @ 60Hz/75Hz
800x640 @ 60Hz/75Hz
1024x768 @ 60Hz/75Hz
Power
Power Adapter
TV Power Input
DC 12V 5A
Power Consumption
< 60W
2 (5W, 4 Ohm)
AC 100V - 240V ~ 1.5A 50 / 60Hz
1440x900 @ 60Hz
PAL / SECAM
BG,D/K,I,L,andL
DVD
BUILT-IN
1680x100 @ 60Hz